Location:Home > Products > General centrifugal fan-4136y.C0mGeneral centrifugal fan
4136y.C0m
T4-72 centrifugal fan
Features : Production of mature, simple structure, high efficiency full pressure
Uses : As a general room ventilation large factories and buildings , as both the input gas , also used as an output gas .
Introduction Detail-3777.com的网址
Model : T4-72 centrifugal fan
Features : Production of mature, simple structure, high efficiency full pressure
Uses : As a general room ventilation large factories and buildings , as both the input gas , also used as an output gas .
Use of the environment : gas transportation should not exceed 80 degrees in the air and other non- pyrophoric , harmless , non-corrosive steel material gas , the gas is allowed to contain viscous substances contained in dust and hard particles is not greater than 150 milligrams per cubic meter
Structural features : T4-72 -type blower fan in NO.3-6 is mainly allocated by the impeller, housing, air inlet , such as the Ministry of Direct motor which consists NO.7-12 in addition to the above section , there are transmission parts and so on.
    1 ) impeller from the 10 after dipping a thin circular blade , curved front plate and the plate after plate composed of steel plate manufacturing , and static and dynamic balance correction , good air performance , high efficiency, low noise , smooth operation.
    2 ) chassis made in two different forms . NO.3-12 chassis made whole can not open ; NO. The chassis is made of two open 14-20 , divided into two halves along a horizontal plane carved with spiral bolt connection.
3 ) air inlet is made whole, mounted on the fan side , parallel to the axial cross-section shape of the curve , the gas can smoothly enter the impeller. And a smaller loss .
    4 ) the transmission part of the spindle , bearing housing, bearings , pulleys components.
1-js9905.com金沙网站-4136y.C0m
Feedback | Legal Notices | PrivacyCopyright: Foshan Yuan Feng Ventilator .Co.,Ltd Copyright © 2014 gdyuanfeng.com All Rights Reserved